Smc access point setup

NTP is used to synchronize the client or server time with another server time or reference time source. This article provides you with instructions on how to configure time settings on your WAP in two ways: manually and automatically. Use the Time Settings page on the WAP to set the system time manually or to configure the system to acquire its time settings from a preconfigured NTP server.

Step 1. Step 2. Click the desired radio button for the appropriate time source from the System Clock Source. The options are listed below:. The use of IP address for this field is not recommended as it can change often.

The device receives the time information from the NTP server. Note: A host name can consist of one or more labels, which are sets of up to 63 alphanumeric characters. This is really hard to setup. Could you tell me the easy way to setup the password. Not for me!! I want to return it. No matter what I do the router dose not work. I have spent enough time on this product and want to send it back! Scam Scam Scam. Be careful not to put in any private tips that can be pinged remotely through your router.

I recently bought a new router for one that I was sure a remote portal…I was right!!! However now my new router is flashing and the firewall has been replaced. I am having the same problem as the other commenters here. I believe this is a scam, and I am reporting this device as such. Thanks for wasting my time and money.

This must be a scam. There is no place to log in. All it wants to do is download software and new drivers. On the other side am I doing something wrong? I type The application should find the access point automatically; unfortunately, it didn't. It worked only after tech support recommended we set the wired PC to an IP address similar to the access point's default address.

Apparently, this is a common problem with setting up the access point. Inexplicably, SMC fails to address it in the manual. You can also manually get to the Web-based configuration screen by typing the access point's provided IP address into your PC's Web browser.

Once the setup wizard was up and running, it was easy to use. The advanced setup screen lets you set the access point to work as a DHCP client or server. And you can modify settings for synchronizing with other access points or set data-packet sizes. If your network suffers from signal interference, shrinking the packet sizes increases network reliability--but slows its efficiency. The status screen displays more than two dozen useful bits of information, including MAC address, WEP status, mode turbo or regular , and signal strength, in easy-to-read tables.

Solid performance Like other To do so, enter a value in the SSID field. This can be any alphanumeric value. Next, set a unique channel for the WAP. In the U. To set WEP, click Encryption. However, you should only do this if your wireless devices can support bit encryption, so check your devices first.

You may be forced to use bit encryption or, worse, no encryption at all. To set the password, select Create With Passphrase and enter a passphrase in the Passphrase field. Manager will hash the passphrase and create a WEP key. You can then reuse this passphrase on wireless devices to rehash the matching key without having to write down the character key. If you have existing WAPs in your organization, you can manually enter the key by selecting Manual Entry and carefully typing in the key in the fields provided.